Product #
|
Product Description |
Applications/Uses |
| 800 |
2 mil clear polypropylene preprinted with orange border "DOCUMENTS ENCLOSED," zone coated with acrylic adhesive. |
Used as pouch tape to secure shipping documents, packing lists or other documents onto outside of packages. |
| 801 |
7.3 mil phosphorescent, non-toxic, non-radioactive, self-extinguishing backing; glows in total darkness after 30 seconds exposure to natural or artificial light (available in 1 hour or 8 hour intensity). |
Used for stage, theatrical and safety applications where there is little or no light to identify walkway markers and objects. |
| 802 |
Engineering grade; 5.5 mil enclosed lens reflective urethane film with 7 year durability; permanent acrylic adhesive; 94 Ib. release liner. |
Designed primarily for use on flat surfaces other than unpointed stainless steel as permanent and temporary traffic signage for industrial, safety, highway and general construction applications; may be screen printed and cut by guillotine, die or thermal kiss cut methods. Meets Specs: L-S 300 C Reflectivity 1, Class 1; FP-85 Type II; ASTM D4956-94 Type I. |
| 803 |
Surveyor's (flagging tape); no adhesive (available in standard and day glow colors). |
Used as a "Flagging Tape" by surveyors, construction crews, paving, grading companies and nurseries for identification purposes. |
| 804 |
Clear 100% polymethyl methacrylates; alternating red and white stripes, modular pattern of reflective prisms film with protective overlay of UV absorbing film on red stripe; PSA. |
Designed as "Vehicle Conspicuity Tape" to outline a vehicle's form, show its size, presence and proximity for other drivers; beneficial in low light and during inclement weather. Meets Specs: DOT C2; NHTSA (49CFR 571). |
| 805 |
Low density polyethylene film;
pre-printed; with various messages in black ink; non-adhesive (bright yellow or red). |
Barricade tape for safety and construction applications;
custom printed message options available. |
| 806 |
Electronically detectable backing;
available printed with various messages; non-adhesive. |
Applied to cables and pipes buried underground to signal their location; printing on tope provides further detailed information when cable or pipe is exposed; custom printing options available. |
| 807 |
100% virgin Teflon® ribbon; thread sealing; non-adhesive. |
Seals and prevents pipe joint seizure in plumbing, air transfer and industrial applications. Meets Spec: ASTM Mil Spec T-27730-A. |
| 808 |
Two-part, hook-n-loop closure in various sizes and colors; available with or without adhesive on backing;
backing with adhesive has release liner. |
Provides a resealable closure for crafts, clothing, furniture and general applications; non-adhesive backing may be sewn in place; may also be adhered to item using adhesive backed version. |
| 810 |
Heavy duty, waterproof, 32 mil PVC with silicone carbide 60 grit abrasive; acrylic adhesive; 6 mil paper release liner. |
Non-skid safety tape can be applied to concrete, tile floors or other safety applications to provide nonskid footing where slippery conditions prevail; aggressive adhesive adheres to irregular surfaces and strengthens with time and heat. |
| 811 |
Cotton cloth backing; non-irritating adhesive. |
Used in athletics as multipurpose tape to wrap fingers and increase ability to grip. |
| 814 |
Adhesive-backed felt (available in several colors and thicknesses). |
Commercial and decorative felt for protecting, padding and sealing surfaces from dust and abrasion. |
| 815 |
Adhesive-backed, natural cork composition available in various thicknesses. |
Provides protection for various surfaces from abrasion; also used for sound deadening. |
| 816 |
Adhesive-backed, natural cork and rubber combination (available in various thicknesses). |
Provides anti-skid properties for surface protection from abrasion; also used for sound deadening. |
| 820 |
1/16" thick, UV resistant, 8 Ib. density, single coated closed eel! PVC foam; acrylic adhesive. Also available in 1/8" thick (#821), 3/16" thick (#822), 1/4" thick (#823), 3/8" thick (#824) and 1/2" thick (#825). |
Used for gasketing, weather stripping, sound deadening and shock absorption; seals out air, moisture, light and dust when compressed at least 30%; offers long service life. |
| 826 |
General purpose; 1/16" thick white/black single coated 2-6 Ibs. density cross-linked polyethylene foam; extremely aggressive, high tack, quick stick rubber resin adhesive; 3.3 mil 60 Ib. release liner. Also available in 1/32" thick (#827), 1/8" thick (#828) and 1/4" thick (#829). |
General purpose applications including joining, mounting, gasketing and sealing which require a foam tape for cushioning. |
| 830 |
3/16" 6 Ib. thick density single coated closed cell PVC foam; acrylic adhesive; polyester film release liner. Also available with a paper release liner (#832). |
Used to seal out air, moisture, light and dust when compressed of least 30% in truck cap mounting, weather stripping and non-critical sealing applications; offers long service life. |
| 831 |
1/4" thick 6 Ib. density single coated closed cell PVC foam; acrylic adhesive; polyester film release liner. Also available with a paper release liner (#833). |
Used to seal out air, moisture, light and dust when compressed at least 30% in truck cap mounting, weather stripping and non-critical sealing applications; offers long service life. |
| 834 |
1/8" thick 15 Ib. density single coated closed cell PVC foam; acrylic adhesive; paper release liner. Also available in 3/16" thick (#835), 1/4" thick (#836) and 1/16" thick (#869). |
Excellent choice for high performance glazing applications. Meets Spec: AAMA 810.1-85 expand cellular glazing. |
| 837 |
General purpose; 1/4" thick 7 Ib. density single coated UV resistant closed cell PVC foam; acrylic adhesive rubber; paper release liner. Also available in 1/8" thick (#838), 3/8" thick (#839), 3/16" thick (#841), 1/2" thick (#842), 1/16" thick (#843), 3/4" thick (#873) and 3/8" thick flame retardant (#868). |
Economical tape used as weather stripping, gasketing and applications requiring positive seals on irregular surfaces; flexible and conformable to seal tight radius curves when critical; seals out air, moisture, light and dust when compressed at least 30%; resists most chemicals, acids and solvents. Meets Specs: General Motors 6086M-IA; Ford ESB M3G 102-A; Chrysler MSAY 511-A, B and C. |
| 840 |
3/8" thick 10 Ib. density closed cell single coated PVC foam with near 100% recovery after extended compression; acrylic adhesive; paper release liner. Also available in 5/16" thick (#863) and 1/4" thick (#864). |
Designed to meet the extreme demands of log home industry; makes permanent air- and weather-tight seal while eliminating concern over "log float" during construction; excellent resiliency with near 100% recovery after extended compression. |
| 844 |
Premium grade; 1/32" thick high density, single coated off white color cellular urethane foam; aggressive acrylic adhesive; 60 Ib. densified kraft glassine release liner. Also available in 1/16" thick (#845) and 1/8" thick (#846). |
Product strength and high performance makes tape suitable for use in wide variety of mounting, joining, gasketing and sound dampening applications; adhesive give high bond strength and resists aging; has good weatherability, reliable in wide range of temperatures and humidity; resistant to solvents and chemicals. Meets Spec: Ul 746C. |
| 847 |
1/32" thick, high-density closed cell black urethane foam adhesive coated on one side; aggressive acrylic adhesive; low density polyethylene film release liner. Also available in 1/16" thick (#848 and 1/8" thick (#849). |
Heavy coating weight makes tape excellent for mounting items such as commercial soap dispensers, reflectors, interior/exterior metal and plastic trim, mirror tiles, wire harness clips, nameplates and for sea ing, gasketing ond to absorb shock and vibration;
bond strength increases with aging; tape weathers well, resists solvents ond chemicals and performs over wide range of humidity and temperatures conditions. |
| 850 |
Heavy duty; 1/8" thick 25 Ib. density closed cell black PVC foam; adhesive coated one side; acrylic adhesive; paper release liner. Also available in 1/4" thick (#851). |
Used for gasketing, gap filling and sound dampening; cushions and absorbs shock, resists wear and abrasion in the most severe applications; excellent dimensional stability, clean cutting and smooth fastener penetration; high hardness resists deterioration. |
| 854 |
SCE 42 Neoprene/EPDM/SBR; 5-7 Ib. density; black closed cell backing; PSA paper release liner. Also available in 1/8" thick (#855), 1/4" thick (#856) and 1/16" thick (#857). |
Conformable, compressible and highly flexible product for cushioning, sound and vibration dampening, gasketing, weather stripping, dust proofing, shock absorption and sealing. |
| 860 |
Economy grade; 1/16" thick medium 11 Ib. density PVC foam; acrylic adhesive, paper release liner. Also available in 3/16" thick (#861). |
Excellent combination of flexibility and conformability with strength and wear resistance for tough duty applications where tape must both flex to fit and seal; used to cushion against heavier loads; con con be cleanly die cut. |
| 865 |
1/16" thick 11 Ib. density closed cell PVC foam; acrylic adhesive; side without adhesive is anchored to polyester film liner. |
Excellent flexibility and conformability with strength and wear resistance for tough duty applications where tope must both flex to fit and seal, gasketing, weather stripping and shock cushion for absorption; excellent dimensional stability; serves as heavier loads. |
| 870 |
Low density, open cell polyether PU foam; high tack synthetic rubber adhesive. |
Tape with low density and high flexibility that allows it to recover quickly; good insulating properties. |
| 875 |
SCE 41,1/8" thick, Neoprene/EPDM/SBR; 6-11 Ib. density; closed cell backing;
rubber based adhesive. Also available in 3/16" thick (#876), 1/4" thick (#877) and 5/16" thick (#878). |
6-11 Ib. density tape that meets most standard specs for closed cell stock; used for cushioning, sound and vibration dampening, gasketing, insulation, shock absorption, dust proofing, sealing and weather stripping. |
| 880 |
3/16" thick, open cell sponge rubber; acrylic adhesive. Also available in 5/16" thick (#881). |
Weather stripping and sound dampening; backing is highly compressible and recovers quickly making it a good choice. |
| 895 |
3/8" thick* low 1.3 Ib. density open cell ether formulation polyurethane light gray foam; high tack synthetic rubber adhesive.
* other thicknesses available. |
Foam with high flexibility and good recovery for variety of applications including gasketing, insulation and sound dampening. |
| 896 |
3/8" thick* low 2 Ib. density open cell ester formulation polyurethane dark gray foam; high tack synthetic rubber adhesive.
*other thicknesses available. |
Foam with high flexibility and good recovery for variety of applications including gasketing, insulation and sound dampening. |
