Metalic tape made of Aluminum, Copper and LeadBelow is a listing of high tech industrial tape products for use in demanding temperature and chemical environments. Click on the part numbers below to access more information or to request a price quotation.
These are sold in lenghts up to 300 yards, and widths from 1/4 to 6 inches. |
| Copper foil |
Part # 911
Part # 912 |
Conductive acrylic |
1.4 mil copper foil |
| 1.4 mil copper foil; non-conductive acrylic adhesive. Aluminum and copper foil tapes are available in a variety of thicknesses, coated with either an acrylic or silicone adhesive. Several products are available with embossed substrates for applications where EMI/RFI shielding is required. Detailed specs available on request. |
|
| Aluminum foil |
Part # 951
Part # 952 |
Acrylic |
3 mil dead soft aluminum foil |
| 3 mil dead soft aluminum foil; acrylic adhesive; no release liner. Specifically designed for economical harness wrap applications, heat reflection, masking and duct sealing; adhesive creates superior bond and sticks to itself well. |
|
| Aluminum foil |
Part # 953
Part # 954 |
Acrylic, aggressive |
3 mil dead soft aluminum foil |
| 3 mil dead soft aluminum foil; aggressive acrylic adhesive; no release liner. Designed for use on variety of flat, irregular or curved surfaces far vapor barrier protection, waterproof sealing, heat reflection/dissipation, masking for paint stripping and electroplating; has high-adhesion to backing; may be applied at low temperature; good high/low temp resistance. Meets Specs: L-T-80B, MIL-T-23397B; AMDT 2 TYPE II. |
|
| Aluminum foil |
Part # 955 |
Acrylic, extremely aggressive |
1.5 mil dead soft aluminum foil |
| General purpose. 1.5 mil dead soft aluminum foil; extremely aggressive clear acrylic adhesive; 3 mil release liner. Use on variety of flat, irregular or curved surfaces for non-critical applications such as sealing out dust and moisture, masking and duct sealing; from 10 degrees F to 120 degrees F; service temperature range from 0 degrees F to 150 degrees FF. Meets Spec: UL510, Section 4 for Flammability. |
|
| Aluminum foil |
Part # 956 |
Conductive acrylic |
2 mil dead soft aluminum foil |
| 2 mil dead soft aluminum foil; conductive, acrylic adhesive; 60 lbs. release liner. Specifically designed for EMI/RFI shielding and cable wrap applications; excellent conformability to irregular surfaces; adhesive is uniformly dispersed with conductive spheres to provide very high EMI/RFI shielding. Meets Spec: UL 510, Section 4 for Flame Spread requirement. |
|
| Aluminum foil |
Part # 957 |
Acrylic, aggressive |
5 mil dead soft aluminum foil |
| Heavy duty; 5 mil dead soft aluminum foil; aggressive, acrylic adhesive. Excellent for heat reflection and use in appliance industry; used on flat, irregular or curved surfaces for vapor barrier protection, waterproof sealing, masking for point stripping and electroplating; high adhesion to backing; good resistance to high/low temperatures. |
|
| Lead foil |
Part # 958 |
Rubber based |
5 mil lead foil |
| 5 mil lead foil; aggressive solvent resistant, rubber-based adhesive; 3 mil release liner. Used extensively for decorative, leaded windows; as vapor barrier; for radiation/x-ray shielding and as masking for electroplating; very conformable. Meets Specs: HH-T-29A; AMDT 2. |
|
| Aluminum foil/glass cloth laminate |
Part # 975 |
Non-corrosive, high temperature transport silicone |
10 mil flame retardant dead soft aluminum foil/glass cloth laminate |
| 7 mil flame retardant dead soft aluminum foil/glass cloth laminate; non-corrosive, high temperature transport silicone adhesive. Used as masking tape in plasma spray applications for jet engine repair; seaming/repairing heat and flame barrier curtains; to protects various missile components such as control cables, harnesses, fuel lines; for wrapping wire harnesses; masking irregularly shaped components; to secure thermal insulation on heating/ventilation ducts; serves as shield for cables on aircraft and in aerospace industry. Meets Specs: MIL-T-83284; McDowell Douglas STM 0683; Martin Morietta STM 1505. |
|
| Aluminum foil |
Part # 976 |
Non-corrosive, high temperature transport silicone |
7 mil flame retardant dead soft aluminum foil/glass cloth laminate |
| 10 mil flame retardant dead soft aluminum foil/glass cloth laminate; non-corrosive, high temperature transport silicone adhesive. Used as masking tape in plasma spray applications for jet engine repair; seaming/repairing heat and flame barrier curtains; to protects various missile components such as control cables, harnesses, fuel lines; for wrapping wire harnesses; masking irregularly shaped components; to secure thermal insulation on heating/ventilation ducts; serves as shield for cables on aircraft and in aerospace industry. Meets Specs: MIL-T-83284; McDowell Douglas STM 0683; Martin Morietta STM 1505.. |
|
