| Product # |
Product Description |
Applications/Uses |
| 300 |
Double-coated; white flat paper tape; aggressive, rubber-based adhesive; siliconized, wrinkle resistant release liner. |
General purpose mounting, holding, splicing, tabbing and fastening of a variety of substrates. Meets Spec: A-A-180B. |
| 301 |
Double-coated (polyester/cotton) cloth; high tack, synthetic adhesive. |
Primarily used for industrial holding, mounting, splicing and carpet installation. |
| 304 |
Stabilized, acrylic transfer film; kraft release liner. |
Specifically designed to meet the demanding end use requirement of high speed flying splice; mounting of nameplates, splicing, framing and matting. |
| 305 |
High performance; acrylic transfer film; kraft release liner. |
Specifically designed to provide excellent adhesion and long term aging on a wide variety of surfaces; laminating to foam for gasketing and sound attenuation; application of decorative ports and mounting of rubber extrusions. |
| 306 |
.5 mil double-coated polyester backing; ultra high tack, moderate shear, rubber adhesive. |
Bonding to polyurethane, polyethylene foams and various other grades of felts, sponges and cork; mounting, splicing, laminating and holding applications. |
| 307 |
.5 mil double-coated polyester backing; acrylic adhesive. |
Excellent for use in indoor/outdoor signs and posters; splicing of paper, plastic materials and foam, laminating and graphic arts applications. |
| 308 |
Double-coated splicing tape; non-woven tissue backing; acrylic adhesive. |
Splicing of paper and cardboard for the corrugated industry. Excellent resistance
to light and aging. |
| 309 |
Double-coated, hand tearable, polyester carrier; high tack, acrylic adhesive. |
For high speed splicing of paper, plastic, films and fiberboard. |
| 310 |
Double-coated polyethylene film; permanent adhesive; thin profile allows conformability and permanency. |
General purpose double-coated applications; excellent carpet hold down. |
| 311 |
Double-coated crepe paper; high tack, rubber adhesive. |
General purpose mounting, bonding and splicing applications. |
| 312 |
Double-coated .5 mil polyester film; with two different rubber adhesives. |
Temporary mounting and holding applications, which require a cleanly removable adhesive. |
| 313 |
Double-coated UPVC plate mount tape; rubber adhesive. |
Designed specifically for use on rotary letter plate mounting. |
| 314 |
Double-coated vinyl with smooth unwind to ensure easy cylinder coverage. |
Designed specifically for use in mounting of printing plates in Flexographic printing. |
| 315 |
Double-coated .75 mil biaxially-oriented polypropylene film; permanent adhesive system. |
Excellent for high strength core start-up, web splicing and holding; used in a wide
variety of splicing, holding, mounting, laminating and attaching decorative
trim. |
| 316 |
Double-coated flatback paper; easy release crepe liner. |
Used for mounting of rubber printing plates and splicing; bonds to almost any surface; installation of golf club grips. Meets Spec: UU-T-91D, Type 11. |
| 317 |
Double-coated .5 mil polyester film adhesive; acrylic adhesive. |
High performance adhesion for more demanding splicing, bonding, nameplate application. |
| 318 |
Double-coated saturated flatback rope paper; high shear, high tack permanent adhesive system. |
Used in the printing and corrugated industries for splicing operations; high tack, high shear and tensile strength for permanent and semi-removable applications. |
| 320 |
Double-coated lightweight tissue paper; high adhesion, rubber adhesive. |
General purpose bonding and splicing operations requiring a thin, conformable tissue
reinforced tape. |
| 321 |
Double-coated 3.5 mil crepe paper; synthetic-based adhesive. |
For use in parts machining, where removal of tape is essential; core start-up. |
| 322 |
Double-coated, transparent, polyester film; pink polypropylene release liner. |
For use in mounting of plastic, metal or wood. |
| 324 |
Double-coated rigid vinyl; easy release liner |
For use in application requiring high adhesion; splicing & mounting |
| 325 |
Double-coated linerless tape; high/low tack, acrylic with differential adhesives. |
General purpose bag closing, label attachment. |
| 326 |
Double-coated UPVC film, high coat weight carrier; high performance, acrylic adhesive. |
Bonds to rough or porous surfaces; joins extruded plastic and metal components; bonds EPDM rubbers and urethane foams |
| 328 |
Double-coated vinyl; soft PVC, black plate mount; high performance rubber adhesive. |
Primarily developed for high performance mounting of photopolymer and rubber plates in Flexographic printing; high adhesion and good shear resistance for high speed and extended print runs. |
| 330 |
Double-coated 1/32" thick, high density urethane; high tack, aggressive acrylic adhesive (available in various performance grades; off-white, groy or black). Also available in 1/16" thick (#331) and 1/8" thick (#332). |
For various high performance industrial and automotive bonding; engineered to high shear applications, mounting and nameplates. Meets various "big three" automotive specs. |
| 333 |
Double-coated .5 mil polyester film; acrylic adhesive. |
Bonding of plastic materials for signs and posters, nameplates and general purpose bonding; low outgassing product. |
|
335 |
Double-coated 1 mil biaxally-oriented polypropylene film; aggressive, red-colored adhesive. |
Designed for easy to identify splicing in paper, films and a variety variety of substrates; developed for continuous web where a visual splice is critical. |
| 337 |
Double-coated, high density, 1/32" thick, gray, polyurethane; high performance adhesive. Also available in 1/16" thick (#338) and 3/64" thick (#339). |
For use in automotive cushioning, sound absorption, gasketing and sealing. |
| 342 |
Double-coated, 3/64" thick, black polyurethane; automotive grade, high-performance adhesive. |
For use in automotive exterior and interior trim mounting. |
| 343 |
Double-coated, 1/16" thick, block polyurethane; automotive grade, high performance adhesive. |
Used in the automotive industry for mounting, joining, vibration absorption, gasketing and sealing. |
| 344 |
Double-coated, 3/64" thick, black polyurethane; automotive grade black polyurethane; automotive grade, high performance adhesive with higher quick stick than #342. |
Used in the automotive industry for mounting, joining, vibration absorption, gasketing and sealing. |
| 345 |
Double-coated, 1/32" thick, black For use in automotive grade high-performance adhesive. |
For use in automotive exterior and interior trim mounting. |
| 347 |
Double-coated polyester carrier; removable acrylic adhesive on liner side/rubber adhesive on exposure side. |
Mounting of artwork and other temporary bonding applications; temporary labels and window decals. |
| 350 |
Double-coated, 1/32" thick medium density, UV resistant, closed cell PVC foam; rubber adhesive. Also available in 1/16" thick (#351), 1/8" thick (#352), 1/8" thick FR (#353) and 1/4" thick (#354). |
Sound dampening, gasketing, shock absorption cushion; standard two-sided adhesive glazing tape; displaces wet sealant and butyls; provides excellent strength and wear resistance; foam density permits clean die-cuts and faster penetration.
Meets Spec: AAMA. |
| 358 |
Double-coated tissue carrier; aggressive high tack, high peel acrylic adhesive. |
Used for foam gasketing and sound attenuation; bonds EPDH rubber and some plastic materials. |
| 360 |
Double-coated 1/32" thick polyethylene foam; high performance acrylic adhesive. Also
available in 1/16" thick (#361) and 1/8" thick (#362). |
Used for glazing tape sound attenuation, gasketing, vibration dampening, or application of decorative trim. |
| 363 |
Double-coated, medium density, 1/2" thick, very high modulus polyurethane. Also
available in 3/8" thick (#364), 1/8" thick (#365), 1/4" thick (#366), 3/16" thick (#367), 3/32" thick (#368) and 1/16" thick (#369). |
Glazing tape, bumper protection, low thermal conductivity, AAMA approved Thermal
Barrier Spacer. |
| 370 |
Double-coated 1/32" thick cross-linked, closed cell, white polyethylene foam; high tack,
high shear, synthetic rubber adhesive. Also available in 1/16" thick (#371)
and 1/8" thick (#372). |
For mounting applications, nameplates, point-of-purchase displays, reflectors
and other surfaces. |
| 373 |
Same as #372, 1/8" thick; except 2# density, cross-linked, white polyethylene
foam; high tack, high shear, synthetic rubber adhesive. |
For mounting applications, nameplates, point-of-purchase displays, reflectors and other surfaces. |
| 373 |
Double-coated, white flexible fabric backing; siliconized liner; rubber adhesive. |
High coating weight is well suited for mounting on irregular surfaces; splicing
textiles, synthetics and carpet installation. |
